Atwood Will Debut Unique RV Fridge in August

  Print Print

May 5, 2011 by   4 Comments

Atwood's new helium-charged gas-absorption refrigerator

Atwood's new helium-charged gas-absorption refrigerator

The basic design of gas-absorption refrigerators — the type most often used in RV applications — hasn’t changed all that much since they first went into commercial use almost 90 years ago. Sure, they’ve been frequently upgraded with features that make them nearly the equivalent of compressor-driven residential units, and they’ve been restyled to today’s standards.

Operationally, however, they still employ the same original concept, using the same basic components — ammonia, hydrogen gas and water — in a closed system to create a chemical reaction that cools by way of evaporation.

That will change — to an extent — in August when Atwood Mobile Products plans a controlled rollout of its new RV refrigerator because the new Atwood reefer incorporates helium instead of hydrogen.

According to Kip Ellis, vice president of sales and marketing for the Elkhart, Ind.-based supplier, the company wanted to focus on the technological side of it and what could be done to advance the refrigeration product that’s used in the RV segment today.

Helium, as Ellis explained, is a product that has been used for quite a long time in cooling — in hotel minibars, for example — and it has, from a cooling and gas-absorption standpoint, several similar properties to hydrogen.

“The challenge has been in how to adapt that technology effectively to the RV market,” he added. “The refrigerators are bigger units and they are subject to temperature swings and vibrations. Also, helium is a different element than hydrogen, so we had to reconfigure the system to accommodate the distinctions in helium versus hydrogen.”

The new refrigerator will also help minimize potential problems from consumer misuse.

Kip Ellis

Kip Ellis

“For a gas-absorption refrigerator to function with optimal efficiency, they need to be level,” said Ellis. “If they’re operated entirely out of level — to varying degrees, for an extended period of time — you ultimately get heat buildup in the system. That can cause cracks in the cooling system itself, which can allow the hydrogen gas to escape.”

Ellis says he isn’t trying to be an alarmist by any means regarding the flammability aspects of hydrogen and, as Ellis pointed out, hydrogen technology has been proven through the years in millions of gas-absorption refrigerators built for RV use.

Yet, it’s clearly one of the aspects with which Atwood has been dealing in developing its new reefers.

“As we did our research on the front end of the current gas-absorption technology used in the market, we recognized that there were some challenges,” Ellis said. “We wanted to enter into it and be responsible to our ownership group in terms of bringing together a product that we believe is reliable and doesn’t present, on the back end, any sort of significant liability.”

Additionally, Atwood’s new reefer incorporates a state-of-the-art “anti-tilt system” built into the unit that shows the consumer on a lighted panel if the refrigerator is level. If it’s not level, it allows them to work to get to the point where it is. If they continue to operate it in an out-of-level position over the life of the unit, it has a counter built into it that will prevent the unit from getting to the point where it could fracture.

“If it’s used over and over in a manner that induces some sort of trauma to the system it will go into a lockout mode that requires the consumer to take it to a dealer for service work,” Ellis said.

Other aesthetic and functional features include two-way power system (AC and LP-gas), LED lighting, a door-ajar alarm, modern digital display and “cool crisper bins” that, Ellis noted, “use blue-hued light to further enhance the cooling aspect of the refrigerator in terms of a look and appearance for the consumer.”

Atwood is currently showing the refrigerator to RV OEMs — it will also be ultimately available as an aftermarket replacement — and plans are in the works to debut the unit with a “managed rollout” in mid-August. At least initially, the new reefer will be available in 6- and 8-cubic-foot models.

“Roughly 80% of the market is using one or the other of those two sizes today,” Ellis noted, “so we feel that this gives us a nice opportunity to get entrenched as a supplier of this product line.”

[Slashdot] [Digg] [Reddit] [Facebook] [Google] [StumbleUpon]


4 Responses to “Atwood Will Debut Unique RV Fridge in August”

  1. Roger D. Ford on May 31st, 2011 12:55 pm

    Our congratulations to Atwood for this new refrigerator design. We are looking forward to testing these units. If they meet our standards, we will be interested giving them 100% of our support. Kip Ellis, give me a call at 270-354-9239.

    Roger D. Ford
    Ford RV Refrigeration Training Center
    Benton, KY 42025

  2. A.Asher on August 1st, 2011 4:56 pm

    Dear Roger,
    We are interested in the test results of Atwood new Helium refrigeratot.
    Thanks & best regards,

  3. Michael Youngblood on June 7th, 2012 3:09 pm

    Asher, our evaluation of the Atwood helium refrigerator is nearing completion. We would be glad to share some information with you if you would send us your contact information.

    Michael L. Youngblood
    Ford RV Service & Refrigeration Training Center
    Benton, KY 42025

  4. Charles Wells/Wells Rv Repair on May 14th, 2013 5:03 pm